CALL 08083106621 OR MAIL sales@veomedics.com FOR PRICE AND QUOTATION

Specification

Features

• Touch-screen for easy operation

• 12.1-inch high-resolution color FT display

• USB interfaces support easy software upgrade and data transfer

• Compatible with Central Monitoring System (CMS)

• Three Working Modes: Monitoring, Surgery and Diagnosis.

-• Simple and friendly operating display interface.

.• Multi-display modes suitable for different applications:

Standard Interface, Large font, ECG Standard Full Display,OXY, Trend Table, BP Trend.

• Built-in high capacity battery up to 3 hours of continuous work

-• VGA output for external display 

Technique Specification

• ECG

• Lead Mode: 5 Leads (I, II, III, AVR, AVL,AVF, V)

• Gain: 2.5mm/mV. 5.0mm/mV. 10mm/mV. 20mm/mV

• Heart Rate: 15-300 BPM (Adult); 15-350 BPM (Neonatal)

Resolution: 1 BPM

Accuracy: #1%

Sensitivity >200 uV(Peak to peak)

JIS

• ST measurement range: -2.0 ~ +2.0 mV

Accuracy: -0.8mV~+0.8mV: +0.02mV or #10%, which is greater

Other Range: unspecified

• Sweep speed: 12.5 mm/s, 25mm/s, 50mm/s

• Bandwidth:

Diagnostic: 0.05~130 Hz

Monitor:0.5~40 HZ

Surgery:1~20 Hz 

SPO2

Measuring Range: 0 ~ 100 %

Resolution: 1%

Accuracy: 70% ~ 100% (‡2 %)

Pulse Rate: 20-250 BPM

Resolution: 1 BPM

Accuracy: +3 BPM 

Optional Parameters:

•Recorder ( Printer)

•Central monitoring system

•Dual IBP

•Etco2

•12-lead ECG;

•Nellcor Sp02;

•Sun Tech NIBP. 

NIBP

• Method: Oscillometry

• Measure mode: Manual, Auto, STAT

• Unit: mmHg, kPa

• Measure and alarm range:

• Adult Mode

SYS 40 ~ 280 mmHg

DIA 10 ~ 225 mmHg

MEAN 20 ~ 240 mmHg

CALL 08083106621 OR MAIL sales@veomedics.com FOR PRICE AND QUOTATION

Features:

1. Compact and potable design
2. Numeric display with plethysmogram display
3. 1.77 inch color TFT LCD in real time display, displayable in big front and big screen
4. Adjustable audio and visual alarm
5. Built-in Li-ion Battery for up to 8 hours continuous working

Specification

1. Parameter: Spo2, Pulse Rate 
2. Spo2 Range:
   1. Range: 0-100%
   2. Accuracy: ±2% at 70-99%
   3. 0% - 69%: Unspecified
3. Pulse Rate:  
   1. Range: 30bpm ~250bpm
   2. Accuracy: ±2% at 30-250bpm

 Oxygen Concentrator consisted of air compressor, adsorption tower of molecular sieve, sensor and flow meter. With the molecular sieve to be absorbent, the machine adopts PSA(pressure swing absorbers ) method to directly concentrate medical oxygen with high concentration from the air.
It is small and portable. The machine takes the advantages of small in volume, light in weight, convenient in moving (as it has turning truckle), stable in performance, high in safety, easy in operating, low in noise, safe in working, which complies with requirements of medical device. The machine can also realizes the measurement and display of SpO2 and pulse rate by connecting accessories.
The machine has a wide application, including family, clinic, hospital, oxygen bar, plateau outpost, gym center, etc.

Function:

• With working indicator
• Built-in filters to pure the gas
• Oxygen concentration status indicator
• Function of accumulating time
• Function of timing shutdown
• Alarm for power failure
• Alarm for high/low pressure protection
• Alarm for low flowrate
• Alarm for high temperature
• Measure SpO2 and pulse rate

Main  features:

◆ Wrist-equipment,tiny and light

◆ Convenient operation

◆  Display of SpO2 ,pulse rate ,pulse waveform and nose flow waveform 

◆ Alarms  for low-power, finger-out and exceeding limits 

◆ Adjustable screen  brightness

◆ Real-time clock

◆ Time power on/off and manual power on/off  

◆ TF card multi-case record

◆ Data uploaded by internal card reader 

◆  PC analysis software

Main Parameters:

◆ SpO2 measuring range: 0%～100% (the resolution is 1%),Accuracy: 70%~100%  :±2% ,below 70% unspecified

◆ Pulse Rate measuring range:  30bpm～250bpm,Accuracy: ±2 bpm or ±2%(select the larger)

◆ Nose air flow  measure range:0rpm～40rpm,Accuracy: ±2rpm

◆ Resistance to surrounding light:  The deviation between the value measured in the condition of man-made light and  indoor natural light and that of darkroom is less than ±1%.

◆ Measurement  Performance in Weak Filling Condition: SpO2 and pulse rate can be shown orrectly  when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ±2  bpm or ±2% (select larger).

◆ Display : 1.8" color OLED 

◆ Power  consumption:≤70mA

◆ Voltage:DC 3.6 ~ 4.2V

◆ Power Supply: 3.7V Lithium  Battery   

◆ Battery working hour:It can last more than 20 hours when the  power is full.

◆ Safety Type: Internally powered equipment，BF Type

Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology in accordance with Capacity Pulse Scanning & Recording Technology, which can be used to measure SpO2 and pulse by finger. It is applicable for use in hospital, oxygen bar, community healthcare and exercise healthcare(It can be used before or after exercise, but not recommended to use during exercising).

Function

• Small in volume, light in weight and convenient to carry.
• Easy and simple to operate, low in power consumption.
• With function menu.
• Display of SpO2 value.
• Display of PR value and bar graph.
• Display of pulse waveform.
• Adjustable screen brightness, PR sound indication.
• Review function.
• Clock function.
• Audible prompt for over-limit and low battery.
• Battery status indication.
• Low battery indication.
• Storage function for SpO2 and PR values, and data stored can be uploaded to PC.
• Real-time data can be uploaded to PC.
• External SpO2 probe can be connected.

The Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology in accordance with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for being used in hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising).
 

Function

• Small in volume, light in weight and convenient in carrying
• Easy to operate, low power consumption
• Operation menu for function settings
• SpO2 value display
• Pulse rate value display, bar graph display
• Pulse waveform display
• Display direction can be changed
• Screen brightness can be changed
• Pulse rate sound indication
• With measured data overruns limits and low-voltage alarm function, the upper/lower alarm limit can be adjusted
• Battery capacity indication
• Low-voltage indication: Low-voltage indication appears before working abnormal caused by low voltage.
• Data storage function, stored data can be uploaded to computer
• Data transmission in real-time
• External SpO2 probe

(including foot switch and power cable)

Blade vibrates at 55.5khz

4 shaft lengthes: 45cm, 36cm, 23cm, 14cm

General cutting speed 4-5 seconds

Safe and reliable coagulation

Tight grasp of tissue on the claw

Use in laparoscopic surgery, open surgery and gynecological surgery

Compatible with BBT 55.5khz hand piece and major existing 55.5khz hand pieces on the market

Description:

Mono cut: Pure cut (300W)

                 Blend cut(250W)

Mono coag: Fulgurate Coag(120W)

                    Spray Coag(100W)

Bipolar Coag: Bipolar Coag(70W)

1. Power cable plug 

2. Dispoable ESU pencil

3. Disposable ESU plate

4. Reusable plate cable

5. Two Buttons Footswitch

6. Reusable Bipolar forceps

7. Reusable Bipolar cable

Specifications

·PCV, PS+ Apnea ventilation modes provide more flexibility to ventilation strategy, suitable for various patients operation including pediatric and adult

· A dvanced ventilation management, intelligent switch for key parameters in conversion process of ventilation mode

· Support both low-flow anesthesia and min-flow anesthesia

· Compact breathing circuit system, high temperature and high pressure sterilization doable

· Electronic flow-meter, precise control and convenient operation

· 12.1'' TFT LCD color screen, highlighted display

· Options such as spotlight and auxiliary table offer more function support

· CE marked, meets EU clinical requirement

Product Description • CE marked, meets EU clinical safety requirement • Large LCD screen, various monitoring waveform and parameters in different colors • IPPV, Pressure mode, SIMV modes can easily meet the ventilation requirement • Integrated CO2 absorption system equipped with NO WATER VAPOR COAGULATION sensor and fast-release APL valve • 6-tube of flow meters for 3-gas sources meet long operation requirement • Optional AGSS provides more protection • Optional multi-gas monitoring • Optional CO2 bypass function • Spirometry loops

Optional longitudinal: 350mm    power wire            1pc